Room TH 513
This is a Lab type room.
Select the Software/Equipment tab below to view additional information about any computers, software, and/or lab equipment in this room.
Basic Information
- Room Type
- Lab - Teaching Lab
- Building
- Thornton Hall
- Scheduled By
- Earth & Climate Sciences
- Supported By
- Academic Technology
- Capacity
- 35
- Description
- ECS Computer Lab
- Support Information
- For more information about this room, contact Academic Technology at at@sfsu.edu or via phone at (415)405-5555
Computer Ports & Adapters
In this room you can connect your computer via HDMI. A usb-c to HDMI adapter is provided in the room. Older computers without USB-C and without HDMI built-in can check out an adapter from Academic Technology in LIB 80.
If your computer has... | Adapter for HDMI |
---|---|
![]() |
— None — |
![]() |
— None — |
![]() |
![]() |
Audio & Visual Equipment
A/V Equipment | In Room? | Notes |
---|---|---|
![]() |
||
![]() |
||
![]() |
||
![]() |
A usb-c to HDMI adapter is provided in the room. Older computers without USB-C and without HDMI built-in can check out an adapter from Academic Technology in LIB 80. |
|
![]() |
||
![]() |
||
![]() |
||
![]() |
||
![]() |
||
Select the Software/Equipment tab at the top of the page to view additional information about any computers, software, and/or lab equipment in this room. |
TURNING ON THE SYSTEM
STEP 1: Turn on the main power-switch.
STEP 2: On the projector control panel, press ON once, and wait 30 seconds.
CONNECTING A LAPTOP: VGA OR HDMI
*All consoles come equipped with VGA, but some have HDMI as well. Please refer to the classroom database chart for what's installed in specific classrooms.
STEP 1: On the projector control panel, press COMP to select the appropriate input (respective classrooms may use different inputs):
VGA cable: COMPUTER, LAPTOP or VGA
HDMI cable: HDMI
STEP 2: Connect VGA (15-pin) or HDMI (small trapezoid) cable to laptop (respective laptops may require adapters).
(When using VGA, plug the attached audio-cord into laptop's headphone jack for sound)
STEP 3: To get audio, turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the appropriate labeled knob when using:
VGA cable: SOURCE TWO, or VGA AUDIO
HDMI cable: HDMI AUDIO
Mac: COMMAND + F1 (COMMAND + dim brightness on macs with a touchbar)
Windows: WINDOWS SYMBOL + P, then select DUPLICATE
RECEIVING CABLECAST
STEP 1: On the projector control panel, press VIDEO. (on the projected image, input should indicate VIDEO).
STEP 2: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the MAIN AUDIO knob or SOURCE ONE knob.
STEP 3: Turn on VCR/DVD combo deck.
STEP 4: Select the desired cable channel on the Pico cable tv tuner.
STEP 5: Call x15103 to start the cablecast.
USING THE VCR/DVD PLAYER
STEP 1: On the projector control panel, press VIDEO. (on the projected image, input should indicate VIDEO).
STEP 2: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the MAIN AUDIO knob or SOURCE ONE knob.
STEP 3: Turn on VCR/DVD combo player. Insert media and press play.
Request Additional Help:
M-Th 8am-8pm
F 8am-5pm
(415) 405-5555
LIB 80
Software/Equipment in this room
Hardware: 4 iMacs