Room T-R 4
Basic Information
- Room Type
- Lecture
- Building
- Temporary Bldg R
- Scheduled By
- Academic Resources
- Supported By
- Academic Technology
- Capacity
- N/A
- Description
- Computer Lab
- Support Information
- For more information about this room, contact Academic Technology at at@sfsu.edu or via phone at (415)405-5555
Audio & Visual Equipment
A/V Equipment | In Room? | Notes |
---|---|---|
![]() |
||
![]() |
||
![]() |
||
![]() |
||
![]() |
||
![]() |
||
![]() |
||
![]() |
||
![]() |
TURNING ON THE SYSTEM
STEP 1: Turn on the main power-switch.
STEP 2: On the projector control panel, press ON once, and wait 30 seconds.
CONNECTING A LAPTOP: VGA OR HDMI
*All consoles come equipped with VGA, but some have HDMI as well. Please refer to the classroom database chart for what's installed in specific classrooms.
STEP 1: On the projector control panel, press COMP to select the appropriate input (respective classrooms may use different inputs):
VGA cable: COMPUTER, LAPTOP or VGA
HDMI cable: HDMI
STEP 2: Connect VGA (15-pin) or HDMI (small trapezoid) cable to laptop (respective laptops may require adapters).
(When using VGA, plug the attached audio-cord into laptop's headphone jack for sound)
STEP 3: To get audio, turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the appropriate labeled knob when using:
VGA cable: SOURCE TWO, or VGA AUDIO
HDMI cable: HDMI AUDIO
Mac: COMMAND + F1 (COMMAND + dim brightness on macs with a touchbar)
Windows: WINDOWS SYMBOL + P, then select DUPLICATE
RECEIVING CABLECAST
STEP 1: On the projector control panel, press VIDEO. (on the projected image, input should indicate VIDEO)
STEP 2: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the MAIN AUDIO knob or SOURCE ONE knob.
STEP 3: Turn on VCR/DVD combo deck; switch to the VCR side (press the VCR/DVD button).
STEP 4: Select the desired cable channel using the remote control. Remote will either be underneath the deck or above the console.
STEP 5: Call x15103 to start the cablecast.
USING THE VCR/DVD PLAYER
STEP 1: On the projector control panel, press VIDEO. (on the projected image, input should indicate VIDEO)
STEP 2: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the MAIN AUDIO knob or SOURCE ONE knob.
STEP 3: Turn on VCR/DVD combo player. Insert media and press play.
Request Additional Help:
M-Th 8am-8pm
F 8am-5pm
(415) 405-5555
LIB 80
Software/Equipment in this room
Hardware: 2 Printer
Hardware: 9 MacBook Pros