Skip Navigation

Room HUM 213


Basic Information

Room Type
Lecture
Building
Humanities
Scheduled By
LCA
Supported By
Academic Technology
Capacity
50
Support Information
For more information about this room, contact Academic Technology at at@sfsu.edu or via phone at (415)405-5555

Computer Ports & Adapters

In this room, you can connect your computer to both HDMI and VGA ports. Make sure you have the right adapter(s) before coming to class. Please note that the adapters in this table are just examples. Adapters vary by brand, color, shape, etc.

If your computer has... Adapter for HDMI Adapter for VGA
USB-C USB-C to HDMI USB-C to VGA
Mini DisplayPort MiniDP to HDMI MiniDP to VGA
HDMI — None — HDMI to VGA
VGA — None — — None —

Audio & Visual Equipment

A/V Equipment In Room? Notes
LCD Projector
LCD TV
VCR/DVD
HDMI Computers without a built-in HDMI port will require an adapter. You can reserve one by calling (415)405-5555 or emailing at@sfsu.edu. Please include the model number of your computer so you can be matched with the appropriate adapter.

VGA Modern computers will typically require an adapter for VGA. You can reserve one by calling (415)405-5555 or emailing at@sfsu.edu. Please include the model number of your computer so you can be matched with the appropriate adapter.
Mic
CourseStream
Doc Cam
Zoom Enabled
Blu-ray

TURNING ON THE SYSTEM

STEP 1: Press main power switch above control panel

STEP 2: Press the ON button at the top left corner of the Pixie Pro panel Panel will light up; ceiling projector will be on after 30-seconds. Fully wait for projector to warm up before proceeding.

CONNECTING A LAPTOP: VGA OR HDMI

STEP 1: At the middle of the Pixie Pro panel, press the appropriate source button when using: 

VGA cable: VGA or LAPTOP
HDMI cable: HDMI

STEP 2: Connect VGA (15-pin) or HDMI (small trapezoid) cable to laptop (respective laptops may require adapters).
(When using VGA, plug the attached audio-cord into laptop's headphone jack for sound)

STEP 3: For audio volume, toggle the knob labeled MAIN on the left audio control panel.
The light next to the knob must be GREEN. If RED, press the button underneath. 

Mirroring your display

Mac: COMMAND  + F1 (COMMAND + dim brightness on macs with a touchbar)
Windows: WINDOWS SYMBOL + P, then select DUPLICATE

RECEIVING CABLECAST

STEP 1: At the middle of the Pixie Pro panel, press the source button labeled CAMPUS TV or TUNER.

STEP 2: Select the desired cable channel using the channel UP/DOWN buttons on the bottom left of the Pixie Pro panel.
Verify the channel at the top of the projected image.  

STEP 3: For audio volume, toggle the knob labeled MAIN on the left audio control panel.
The light next to the knob must be GREEN. If RED, press the button underneath. 

STEP 4: Call x15103 to start the cablecast.

USING THE VCR/DVD PLAYER

STEP 1: At the middle of the Pixie Pro panel, press the source button labeled DVD/VCR.

STEP 2: Inside the cabinet, turn on VCR/DVD combo player. Insert media and press play.

STEP 3: For audio volume, toggle the knob labeled MAIN on the left audio control panel.
The light next to the knob must be GREEN. If RED, press the button underneath. 

USING THE BLU-RAY PLAYER

STEP 1: At the middle of the Pixie Pro panel, press the source button labeled BLU-RAY.

STEP 2: Inside the cabinet, turn on Blu-ray player. Insert media and press play.

STEP 3: For audio volume, toggle the knob labeled MAIN on the left audio control panel.
The light next to the knob must be GREEN. If RED, press the button underneath. 

USING THE DOCUMENT CAMERA

STEP 1: At the middle of the Pixie Pro panel, press the source button labeled DOCUMENT CAMERA.

STEP 2: Document camera is located on a sliding tray inside the cabinet. Slide out the tray, erect the arms, and press the power button. 

STEP 3: Place desired item on the surface of the document camera to project onto the screen.



Request Additional Help: 

M-Th 8am-8pm

F 8am-5pm

(415) 405-5555

LIB 80