Room CA 106
Basic Information
- Room Type
- Lecture
- Building
- Creative Arts
- Scheduled By
- Theatre Arts
- Supported By
- Academic Technology
- Capacity
- 50
- Support Information
- For more information about this room, contact Academic Technology at at@sfsu.edu or via phone at (415)405-5555
Computer Ports & Adapters
In this room you can connect your computer via HDMI. A usb-c to HDMI adapter is provided in the room. Older computers without USB-C and without HDMI built-in can check out an adapter from Academic Technology in LIB 80.
If your computer has... | Adapter for HDMI |
---|---|
![]() |
— None — |
![]() |
— None — |
![]() |
![]() |
Audio & Visual Equipment
A/V Equipment | In Room? | Notes |
---|---|---|
![]() |
||
![]() |
||
![]() |
||
![]() |
A usb-c to HDMI adapter is provided in the room. Older computers without USB-C and without HDMI built-in can check out an adapter from Academic Technology in LIB 80. |
|
![]() |
||
![]() |
||
![]() |
||
![]() |
||
![]() |
TURNING ON THE SYSTEM
STEP 1: Turn on the main power-switch.
STEP 2: On the projector control panel inside the middle drawer, press ON once, and wait 30 seconds.
CONNECTING A LAPTOP: VGA OR HDMI
*All consoles come equipped with VGA, but some have HDMI as well. Please refer to the classroom database chart for what's installed in specific classrooms.
STEP 1: On the projector control panel inside the middle drawer, press COMP to select the appropriate input (respective classrooms may use different inputs):
VGA cable: COMPUTER, LAPTOP, or VGA
HDMI cable: HDMI
STEP 2: Connect VGA (15-pin) or HDMI (small trapezoid) cable to laptop (respective laptops may require adapters).
(When using VGA, plug the attached audio-cord into laptop's headphone jack for sound)
*Computer cables will either be to the side of the wooden box or inside the middle drawer.
STEP 3: At the AV1 Input Selector, press in the appropriate button when using:
VGA cable: COMPUTER AUDIO or VGA AUDIO
HDMI cable: HDMI AUDIO
STEP 4: To get audio, turn on the amplifier (PA Power Switch). Adjust volume using the Master Volume Control knob.
Mirroring your displayMac: COMMAND + F1 (COMMAND + dim brightness on macs with a touchbar)
Windows: WINDOWS SYMBOL + P, then select DUPLICATE
RECEIVING CABLECAST
STEP 1: On the projector control panel inside the middle drawer, press VIDEO. (on the projected image, input should indicate VIDEO).
STEP 2: At the AV1 Input Selector, press in button labeled CABLE TV.
STEP 3: Turn on the amplifier (PA Power Switch). Adjust volume using the Master Volume Control knob.
STEP 4: Select the desired cable channel using the keypad on the Sony cable TV channel selector (CHANNEL # + ENTER).
STEP 5: Call x15103 to start the cablecast.
USING THE VCR/DVD PLAYER
STEP 1: On the projector control panel inside the middle drawer, press VIDEO. (on the projected image, input should indicate VIDEO).
STEP 2: At the AV1 Input Selector, press in button labeled VCR/DVD.
STEP 3: Turn on the amplifier (PA Power Switch). Adjust volume using the Master Volume Control knob.
STEP 4: Turn on VCR/DVD combo player. Insert media and press play.
USING THE DOCUMENT CAMERA
STEP 1: On the projector control panel inside the middle drawer, press VIDEO. (on the projected image, input should indicate VIDEO).
STEP 2: At the AV1 Input Selector, press in button labeled VIDEO OVERHEAD.
STEP 3: Document camera is located on a sliding tray on the side of the wooden box. Slide out the tray, erect the arms, and press the power button.
Using the DTEN for Zoom meetings
For more information on the DTEN Zoom room device, check the support documentation for Zoom Rooms.Request Additional Help:
M-Th 8am-8pm
F 8am-5pm
(415) 405-5555
LIB 80