Skip Navigation

Room BH 37


Basic Information

Room Type
Classroom
Building
Burk Hall
Scheduled By
ALI
Supported By
Academic Technology
Capacity
34
Support Information
For more information about this room, contact Academic Technology at at@sfsu.edu or via phone at (415)405-5555

Computer Ports & Adapters

In this room you can connect your computer via HDMI. A usb-c to HDMI adapter is provided in the room. Older computers without USB-C and without HDMI built-in can check out an adapter from Academic Technology in LIB 80.

If your computer has... Adapter for HDMI
HDMI — None —
USB-C — None —
Mini DisplayPort MiniDP to HDMI

Audio & Visual Equipment

A/V Equipment In Room? Notes
LCD Projector
LCD TV
VCR/DVD
HDMI A usb-c to HDMI adapter is provided in the room. Older computers without USB-C and without HDMI built-in can check out an adapter from Academic Technology in LIB 80.

Mic
CourseStream
Doc Cam
Zoom Enabled
Blu-ray

TURNING ON THE SYSTEM

STEP 1: Turn on the main power-switch.

STEP 2: On the projector control panel, press ON once, and wait 30 seconds.

CONNECTING A LAPTOP: VGA 

STEP 1: On the projector control panel, press COMP (on the projected image, input should indicate COMPUTER or LAPTOP).

STEP 2: Connect VGA (15-pin) cable to laptop (respective laptops may require adapters).
Plug the attached audio-cord into laptop's headphone jack for sound. 

STEP 3: To get audio, turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the COMPUTER AUDIO or SOURCE ONE knob.

Mirroring your display

Mac: COMMAND  + F1 (COMMAND + dim brightness on macs with a touchbar)
Windows: WINDOWS SYMBOL + P, then select DUPLICATE

RECEIVING CABLECAST

STEP 1: On the projector control panel, press VIDEO. (on the projected image, input should indicate VIDEO).

STEP 2: On the video switcher, press in the white square labeled CABLE TV.

STEP 3: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the MAIN AUDIO knob or SOURCE ONE knob.

STEP 4: Select the desired cable channel on the Pico cable tv tuner.  

STEP 5: Call x15103 to start the cablecast.

USING THE VCR/DVD PLAYER

STEP 1: On the projector control panel, press VIDEO. (on the projected image, input should indicate VIDEO).

STEP 2: On the video switcher, press in the white square labeled VCR/DVD.

STEP 3: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the MAIN AUDIO knob or SOURCE ONE knob.

STEP 4: Turn on VCR/DVD combo player. Insert media and press play.



Request Additional Help: 

M-Th 8am-8pm

F 8am-5pm

(415) 405-5555

LIB 80