Skip Navigation

Room BH 39


Basic Information

Room Type
Classroom
Building
Burk Hall
Scheduled By
Secondary Ed
Supported By
Academic Technology
Capacity
34
Support Information
For more information about this room, contact Academic Technology at at@sfsu.edu or via phone at (415)405-5555

Computer Ports & Adapters

In this room, you can connect your computer to both HDMI and VGA ports. Make sure you have the right adapter(s) before coming to class. Please note that the adapters in this table are just examples. Adapters vary by brand, color, shape, etc.

If your computer has... Adapter for HDMI Adapter for VGA
USB-C USB-C to HDMI USB-C to VGA
Mini DisplayPort MiniDP to HDMI MiniDP to VGA
HDMI — None — HDMI to VGA
VGA — None — — None —

Audio & Visual Equipment

A/V Equipment In Room? Notes
LCD Projector
LCD TV
VCR/DVD
HDMI Computers without a built-in HDMI port will require an adapter. You can reserve one by calling (415)405-5555 or emailing at@sfsu.edu. Please include the model number of your computer so you can be matched with the appropriate adapter.

VGA Modern computers will typically require an adapter for VGA. You can reserve one by calling (415)405-5555 or emailing at@sfsu.edu. Please include the model number of your computer so you can be matched with the appropriate adapter.
Mic
CourseStream
Doc Cam
Zoom Enabled
Blu-ray

TURNING ON THE SYSTEM

STEP 1: Press the ON button at the top left corner of the Pixie panel

STEP 2: Pixie panel will light up; ceiling projector will be on after 30-seconds. 

CONNECTING A LAPTOP: VGA OR HDMI

STEP 1: At the top-middle of the Pixie panel, press the appropriate source button when using: 

VGA cable: LAPTOP or VGA
HDMI cable: HDMI

STEP 2: Connect VGA (15-pin) or HDMI (small trapezoid) cable to laptop (respective laptops may require adapters).
(When using VGA, plug the attached audio-cord into laptop's headphone jack for sound)

STEP 3: For audio volume, use the UP/DOWN volume buttons on the left side of the Pixie panel to toggle. 

Mirroring your display

Mac: COMMAND  + F1 (COMMAND + dim brightness on macs with a touchbar)
Windows: WINDOWS SYMBOL + P, then select DUPLICATE

RECEIVING CABLECAST

STEP 1: At the top-middle of the Pixie panel, press the source button labeled TUNER or CAMPUS TV.

STEP 2: Select the desired cable channel using the channel UP/DOWN buttons on the bottom left of the Pixie panel.
Verify the channel at the top of the projected image.   

STEP 3: For audio volume, use the up/down volume buttons on the left side of the Pixie panel to toggle. 

STEP 4: Call x15103 to start the cablecast.



Request Additional Help: 

M-Th 8am-8pm

F 8am-5pm

(415) 405-5555

LIB 80